Fiber Driver Gigabit Ethernet and Multirate Multiplexers

Fiber Driver Gigabit Ethernet and Multirate Multiplexers

The Fiber Driver® EM316xxMX2R time division multiplexers (TDM) are access modules designed to boost optic fiber and wavelength utilization while providing trunk redundancy capabilities. They allow significant cost reduction and higher fiber usage over a pure optical multiplexing solution. The modules aggregate two copper Ethernet data channels onto one full-duplex fiber optic trunk to distances of over 100 kilometers.

These modules use standard SFP field-installable transceivers, allowing individual interface optimization for each application including the full range of MRV GbE and 1GFC SFPs for single-mode fiber, multi-mode fiber, and copper interfaces. They integrate into a wide range of applications including CWDM and DWDM.

Features

  • Two Gigabit Ethernet or 2 Fibre Channel data channels over one BIDI trunk using a single wavelength – optimizes the existing fiber plant and available wavelengths
  • Transparent operation – does not alter data or packet framing
  • SFP interfaces – add or change optics as needed, create a WDM wavelength-specific trunk
  • Ultra low latency – excellent for Digital Video applications
  • Real-time SFP interface monitoring through Digital Diagnostics (SFF-8472) – early detection of possible network problems before service is affected
  • Trunk link redundancy with under 100 ns switchover – no loss of service during primary link failure, essential for mission-critical applications
  • Per-channel indication of remote link
  • Extremely compact 1-slot form factor
  • Powerful management options - SNMP, MegaVision, and command line access
  • Can be used in any Fiber Driver chassis
  • Cost effective solution that reduces both CapEx and OpEx

top

Applications

Application Drawings







top

Specifications

ProtocolsGigabit Ethernet and 1 Gigabit Fibre Channel
ConnectorsRJ-45, SFP
Operating Temperature0 to 50˚ C/32 to 122˚ F
Storage Temperature-40 to 70˚ C/-40 to 158˚ F
Relative Humidity85% maximum, non-condensing
CertificationsEmissions/Immunity: FCC Part 15, subpart B, 1999, (Class A); CE Mark – EN 50081-1:1992; EN 50082:1997; EN 55024:1998; EN 55022:1998; AS/NZS 3548:1995
DimensionsHeight : 25 mm/1 in, Width: 175 mm/3 in, Depth : 175mm/7in
Weight213 g/7.5 oz
Approximate Range(km)Depends on SFP installed

top

Ordering Information

TDM/Fiber Optimization Modules
EM316GEMX2R Time Division Multiplexer (TDM), two 1 Gb Ethernet SFP data interfaces to two redundant SFP trunk interfaces
EM316MRMX2R Multirate Time Division Multiplexer (TDM), two 1 Gb Ethernet or two 1 Gb Fibre Channel SFP data interfaces to two redundant SFP trunk interfaces

top