LambdaDriver EDFA Optical Amplifiers
EM800-OAx/EM1600-OAx
LambdaDriver® Optical Amplifier modules are a family of low-noise Erbium-Doped Fiber Amplifiers (EDFA) ideal for Metro and Long-Haul Dense Wavelength Division Multiplexing (DWDM) as well as Single Wavelength applications. The optical design, coupled with sophisticated control circuitry, allows these Optical Amplifiers to provide constant gain even with wavelengths being added or dropped in the network. Any fluctuations caused by wavelengths addition/removal can be handled by its ultrafast transient suppression.
- Datasheet:
- Letter PDF
- A4 PDF
Features
- Booster, In line and Pre-Amplifier
- Up to 22dBm maximum output power
- Protocol and bandwidth transparent
- Gain flatness (with GFF) less than 1.0 dB
- Low Noise figure
- Optical power monitoring
- Front panel status LEDs
- Fast transient suppression time
- Automatic Laser Shutdown (ALS)
Specifications
| Operating Temperature | -5 to 45° C/23 to 113° F |
| Storage Temperature | -10 to 70° C/14 to 158° F |
| Relative Humidity | 85% maximum, non-condensing |
| Dimensions | EM800 + 18dBm type: Height: 130.7 mm/5.145 in; Width: 26.93 mm/1.06 in; Depth: 227 mm/8.956 in (1 slot wide) EM1600 + 18dBm type: Height: 263.4 mm/10.37 in; Width: 26.93 mm/1.06 in; Depth: 227 mm/8.956 in (1 slot wide) EM800 High Power: Height: 130.7 mm/5.145 in; Width: 54.18 mm/2.13 in; Depth: 227 mm/8.956 in (2 slot wide) EM1600 High Power: Height: 263.4 mm/10.37 in; Width: 54.18 mm/2.13 in; Depth: 227 mm/8.956 in (2 slot wide) |
| Weight | EM800 + 18dBm type: 0.586 Kg/1.28 Lb EM1600 + 18dBm type: 0.865 Kg/2.11 Lb EM800 High Power: 1.016 Kg/2.24 Lb EM1600 High Power: 1.305 Kg/2.47 Lb |
| Connectors | All: SC High Power Output: E2000APC |
| Wavelength Range | Minimum: 1528; Maximum: 1563; Units: nm |
| Maximum Output power (dBm) | Booster & In-Line: +18; With Mid-Stage: +17; Single-Channel & Pre-Amplifier: +13; High Power Booster: 22; High Power In-line: +21 |
| Minimum Input power (dBm) | Booster: -5; In-Line: -20; Pre-Amplifier: -32 |
| Input/Output Isolation (dB) | Minimum: 30 |
| Signal Gain Typical * (dB) | Booster: 9; In-Line: 20 or 25; Pre-Amp: 10 or 20 |
| Gain Flatness at Specified Gain with GFF (dB) | Typical: +/-0.5; Maximum: +/-1.0 |
| Signal- Noise Figure for Gain > 20 dB | Typical: 5.0; Maximum: 5.5 |
| Optical Return Loss (at Input and Output ports) (dB) | Minimum: 25 |
| Polarization Mode Dispersion (dB) | Typical: 0.3; Maximum: 0.5 |
| Polarization Dependent Gain (db) | Typical: +/-0.2; Maximum: +/-0.5 |
| Transient Overshoot (10 dB Drop) | Typical: 0.5; Maximum: 1.0 |
| Transient Suppression Time (10 dB Drop) (µs) | Maximum: <32 |
| Tunable Dispersion Range: EM800/EM1600 - OAPD EM800/EM1600 - OABD EM800/EM1600 - OAID | -1700ps/nm to +1700ps/nm |
| LEDs | WDM transmission laser status, Temperature status, Port reception status, Port transmission status |
| Monitoring | Input power, Output power, Gain, Temperature |
| Alarm | Input power, Output power, Temperature |
| Power Consumption | 18dBm type: 3.3 W High Power: 15 W |
| * Model dependent - see ordering information section | |
Ordering Information
| Lambda Driver - Modular WDM Optical Series | |
| LD1600 Platform | |
| Optical Amplifiers for LD1600 | |
| EM1600-OAI | Optical In Line Amplifier for the Lambda Driver-1600 with GFF |
| EM1600-OAIM | Optical In Line Amplifier with Mid Stage for the Lambda Driver-1600 +17dbm output |
| EM1600-OAP | Optical Pre-Amplifier for the Lambda Driver-1600 with GFF |
| EM1600-OAP10 | 10dB Gain Optical Pre-Amplifier for the Lambda Driver-1600. |
| EM1600-OAB | Optical Booster Amplifier for the Lambda Driver-1600 with GFF |
| EM1600-OABM | Optical Booster Amplifier with Mid Stage for the Lambda Driver-1600 |
| EM1600-SOAI | Single channel Optical In Line Amplifier for the Lambda Driver-1600 +13dbm output |
| EM1600-SOAIM | Single channel Optical In Line Amplifier with Mid Stage for the Lambda Driver-1600 +13dbm output |
| EM1600-SOAP | Single channel Optical Pre-Amplifier for the Lambda Driver-1600 |
| EM1600-SOAB | Single channel Optical Booster Amplifier for the Lambda Driver-1600 |
| EM1600-SOAB13 | Single channel Optical Booster Amplifier for the Lambda Driver-1600 +13dbm output |
| High Power Optical Amplifiers for LD1600 | |
| EM1600-OAB22P | Optical Booster Amplifier for the Lambda Driver-1600 with +22dbm output. |
| EM1600-OAB22PM | Optical Booster Amplifier for the Lambda Driver-1600 with +22dbm output and MidStage. |
| EM1600-SOAB22P | Single channel Optical Booster Amplifier for the Lambda Driver-1600 with +22dbm output and 20db gain. |
| EM1600-OAI21P | Optical In Line Amplifier for the Lambda Driver-1600 with +21dbm output. |
| EM1600-OAI21PM | Optical In Line Amplifier with Mid Stage for the Lambda Driver-1600 with +21dbm output. |
| LD800 Platform | |
| Optical Amplifiers for LD400/800 | |
| EM800-OAI | Optical In Line Amplifier for the Lambda Driver-800 with GFF |
| EM800-OAIM | Optical In Line Amplifier with Mid Stage for the Lambda Driver-800 +17dbm output |
| EM800-OAIM25 | Optical In Line Amplifier with Mid Stage for the Lambda Driver-800 +17dbm output and 25db gain. |
| EM800-OAP | Optical Pre-Amplifier for the Lambda Driver-800 with GFF |
| EM800-OAB | Optical Booster Amplifier for the Lambda Driver-800 with GFF |
| EM800-SOAI | Single channel Optical In Line Amplifier for the Lambda Driver-800 +13dbm output |
| EM800-SOAIM | Single channel Optical In Line Amplifier with Mid Stage for the Lambda Driver-800 +13dbm output |
| EM800-SOAB | Single channel Optical Booster Amplifier for the Lambda Driver-800 with +18dbm output |
| EM800-SOAB13 | Single channel Optical Booster Amplifier for the Lambda Driver-800 with +13dbm output |
| EM800-SOAP | Single channel Optical Pre-Amplifier for the Lambda Driver-800 |
| High Power Optical Amplifiers for LD400/800 | |
| EM800-OAB22P | Optical Booster Amplifier for the Lambda Driver-800 with +22dbm output. |
| EM800-OAB22PM | Optical Booster with Mid Stage for the Lambda Driver-800 +22dbm output. |
| EM800-SOAB22P | Single channel Optical Booster Amplifier for the Lambda Driver-800 with +22dbm output and 20db gain. |
| EM800-OAI21P | Optical In Line Amplifier for the Lambda Driver-800 with +21dbm output. |
| EM800-OAI21PM | Optical In Line Amplifier for the Lambda Driver-800 with +21dbm output. |
| WDM Lambda Driver | |
| LD1600 Platform | |
| Optical Amplifiers, Tunable Dispersion Compensation, LD1600 | |
| EM1600-OABD | Optical Booster Amplifier with integrated tunable dispersion compensation for the Lambda Driver-1600. |
| EM1600-OAID | Optical In Line Amplifier with integrated tunable dispersion compensation for the Lambda Driver-1600. |
| EM1600-OAPD | Optical Pre-Amplifier with integrated tunable dispersion compensation for the Lambda Driver-1600. |
| EM1600-OAP10D | 10dB Gain Optical Pre-Amplifier with integrated tunable dispersion compensation for the Lambda Driver-1600. |
| LD800 Platform | |
| Optical Amplifiers, Tunable Dispersion Compensation LD400/800 | |
| EM800-OABD | Optical Booster Amplifier with integrated tunable dispersion compensation for the Lambda Driver-800 +17dbm output. |
| EM800-OAID | Optical In Line Amplifier with integrated tunable dispersion compensation for the Lambda Driver-800 +17dbm output. |
| EM800-OAI25D | Optical In Line Amplifier with integrated tunable dispersion compensation for the Lambda Driver-800 (+17dbm output and 25db gain). |
