LambdaDriver Dual 10G Access
The TM2-XFP is a single slot module incorporating two independent 10Gbps transponders that convert the “gray” wavelength of a terminal equipment interface into ITU-T grid DWDM wavelength enabling its transport via the LambdaDriver® Optical Transport System. The integrated Automatic Laser Shutdown (ALS) feature automatically reduces the optical power of the transmitters to an eye safe level in case of a broken link. The ALS feature is implemented on both ports of the transponders, the DWDM trunk and Terminal equipment access port.
- Datasheet:
- Letter PDF
- A4 PDF
Features
- 10Gbps data rates settable to OC-192, 10GE or 10FC
- 3R support
- LIN (Link Integrity Notification) mechanism
- Remote Loop-back
- Power monitoring
- Y-Cable backup protection
- Hot swappable
Specifications
| Operating Temperature | - 5 to 45° C/23 to 113° F |
| Storage Temperature | -10 to 70° C/14 to 158° F |
| Relative Humidity | 85% maximum, non-condensing |
| Dimensions | Height: 130.7 mm/5.145 in; Width: 26.93 mm/1.06 in; Depth: 227 mm/8.956 in |
| Weight | 0.55 kg/1.21 lb |
| Connector | XFP sockets all ports |
| Data Rate | 10GE or OC192 (STM-64) |
| TX Port (Access Transmit Port) | Connection to access equipment receive port |
| RX Port (Access Receive Port) | Connection to access equipment transmit port |
| Optical parameters | Per the XFP |
| LEDs | |
| P/L n: | Detection of XFP and Link presence or absence at port n |
| Card without XFPs | 3.3W |
| Each XFP | 6.8W |
