TereScope® 2000 –Up to GE
For Voice Connectivity - E1/T1 and 4x E1/4T1 Solutions
The carrier class TereScope® 2000 operates at data rates of 2 Mbps to 1.25 Gbps. TereScope 2000 systems are used for medium distances and support a wide variety of protocols at full duplex at wire-speed. The more popular protocols are supported, but the power supplies and interfaces are not modular (unlike the TS4000 and TS5000), and a more compact aiming head is used, to reduce system cost. This balance of a basic set of features with multiple transmitters and a large aperture receiver in the large form factor offers a lower cost solution while still maintaining the increased robustness of the large form-factor links. Several TS2000 models are available: TS2000/E1 (or T1), TS2000/4E1 (or 4T1), TS2000/100, TS2000/155, TS2000/G and TS2000/G-F.
TereScope® 2000 systems, like all TereScope units, are deployable within a matter of hours. TereScope 2000 supplies a connectivity that reaches up to 4.1 km and supports various protocols. The TS2000 has two transmitters and an 8” RX lens - these features almost eliminate any scintillation influence and en¬hance the transceiver’s reliability. The TS2000 is especially recommended for Voice Connectivity - E1/T1 & 4x E1/4T1 solutions even for short distances.
TS2000/100 - Supports Fast Ethernet. This transceiver has a copper 100BaseTX interface. The TS2000/100 low voltage version (V3) has a Power over Ethernet (PoE) configuration. The TS2000/155 - Supports 4 operational modes: E3, T3, Fast Ethernet and OC3 (155 Mbps). It is possible to order optional Open Protocol or customized protocol (should be specified in the order). The TS2000/G is offered for FiberChannel and Gigabit Ethernet applications, as well as a fusion option TS2000/G-F with SFP interfaces for FibreChannel and Gigabit Ethernet.
Features
- Accommodates 1.0625 & 1.25 Gbps networks, for protocols such as: Fibre Channel and Gigabit Ethernet, or 1 to 155 Mbps networks, for protocols such as: E3/T3, Fast Ethernet, FDDI, ATM, OC-3 and STM-1
- PoE (power over Ethernet) in the TS2000/100 model
- Distance up to 4100 meters
- Built-in dry contacts
- SNMP – optional (in TS2000/G and TS2000/G-F the SNMP is included)��
- SFP interface for the TS2000/G-F
- Alignment using both visual feedback and received power indicators
- Fast deployment
- License-free operation
- Remote management options
- Weatherproofing: IP66
- Secure transmission
- Eyes safety Class 1M
- Chain multiple connections
- FUSION - Failover to radio backup (TS2000/G-F only)
- Operating at wide temperature range
- Low voltage (35-60VDC) and High voltage (100-240VAC) models
- Low consumption
- MTBF more than 10 year
- Heating: All our systems have an internal air circulation feature, based on dissipation of the power supply heat.
Specifications
| TS2000/E1 (or T1) | |
| Product Code | TS2000/E1/V* or TS2000/T1/V* |
| Applications/Data Protocol | E1 – 2.048Mbps, T1- 1.55Mbps, G.704 & G.703 |
| Performance: (distance @ attenuation) | 4100m @ 3db/km 3200m @ 5db/km 2150m @ 10db/km 1510m @ 17db/km 1000m @ 30db/km Minimum operating distance: 200m |
| Transmitter | Light source: 2 VCSELs Beam Divergence 3.5 mrad |
| Receiver | Detector: Silicon Photodiode |
| Interface | RJ48 (STP) |
| Power Supply | 100 – 240 VAC @ 50/60 Hz or 35-60 VDC (V3 versions) Power consumption : 15W |
| Operating Temperature | -50 to +60° C/-58 to 140° F |
| TS2000/4E1 (or 4T1) | |
| Product Code | TS2000/4E1/V* or TS800/4T1/V* |
| Applications/Data Protocol | 4xE1 - 4x2.048Mbps, 4xT1 – 4x1.55Mbps G.703 & G704 |
| Performance: (distance @ attenuation) | 3400m @ 3db/km 2700m @ 5db/km 1810m @ 10db/km 1290m @ 17db/km 870m @ 30db/km Minimum operating distance: 190m |
| Transmitter | Light Source : 2 VCSELs, Beam Divergence 3.5 mrad |
| Receiver | Detector: Silicon Photodiode |
| Interface | Universal connector E1: 75 Ohm or 120 Ohm, T1: 100 Ohm |
| Power Supply | 100 – 240 VAC @ 50/60 Hz or 35-60 VDC (V3 versions) Power consumption : 15W |
| Operating Temperature | -50 to +60° C/-58 to 140° F |
| TS2000/100 | |
| Product Code | TS2000/FET/V* |
| Applications/Data Protocol | Fast Ethernet – 100Mbps |
| Performance: (distance @ attenuation) | 2580m @ 3db/km 2070m @ 5db/km 1420m @ 10db/km 1050m @ 17db/km 750m @ 30db/km Minimum operating distance: 100m |
| Transmitter | Light Source : 2 VCSELs, Beam Divergence 3.5 mrad |
| Receiver | Detector: Silicon Photodiode |
| Interface | 100Base-TX |
| Power Supply | 100 – 240 VAC @ 50/60 Hz or 35-60 VDC (V3 versions) PoE (Power over Ethernet) in V3 (Low Voltage) version. Power consumption : 15W |
| Operating Temperature | -50 to +60° C/-58 to 140° F |
| TS2000/155 | |
| Product Code | TS2000/XYZ/V* |
| Applications/Data Protocol | T3, E3, Fast Ethernet, and ATM(1-155Mbps) |
| Performance: (distance @ attenuation) | 2580m @ 3db/km 2070m @ 5db/km 1420m @ 10db/km 1050m @ 17db/km 750m @ 30db/km Minimum operating distance: 100m |
| Transmitter | Light Source : 2 VCSELs, Beam Divergence 3.5 mrad |
| Receiver | Detector: Silicon Photodiode |
| Interface | Fiber Optic Transceiver – Multimode (Singlemode available on request) |
| Power Supply | 100 – 240 VAC @ 50/60 Hz or 35-60 VDC (V3 versions) Power consumption : 15W |
| Operating Temperature | -50 to +60° C/-58 to 140° F |
| TS2000/G & TS2000/G-F | |
| Product Code | TS2000G/XYZ/V* or TS2000G/XYZ/F* |
| Applications/Data Protocol | Gigabit Ethernet , Fiber Channel- 1.0625Gbps & 1.25 Gbps |
| Performance: (distance @ attenuation) | 2300m @ 3db/km 1800m @ 5db/km 1300m @ 10db/km 950m @ 17db/km 650m @ 30db/km Minimum operating distance: 100m |
| Transmitter | Light Source: 2 VCSELs, Beam Divergence 3 mrad |
| Receiver | Detector: APD |
| Interface | Fiber Optic Transceiver – SFP (MM/SM) |
| Power Supply | 100 – 240 VAC @ 50/60 Hz or 35-60 VDC (V3 versions). Power consumption : 15W |
| Operating Temperature | -30 to +50° C/-22 to 122° F |
| All Models | |
| Storage Temperature | -50 to +70° C/-58 to 158° F |
| Humidity | 95% non-condensing |
| Housing | Weatherproofing: IP66 |
| Eye Safety Class | 1M |
| Dimensions mounted on accessories(mm) | Depth : 790 mm/31.1 in Width: 390 mm/15.4in Height : 508 mm/20.0 in |
| Weight | TereScope: 13 kg Accessories: 13 kg |
| @ 3 dB/km = Light rain (5-10 mm/hr) - Light haze @ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze @10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog @17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog @30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog | |
Ordering Information
| Active TereScope Products | |
| TereScopes - Up to Gigabit Ethernet | |
| TS2000G/XYZ/V* | TereScope2000/G, 620m@30db/km and 2300@3db/km, Giga-Ethernet and Fibre Channel Link. Interface options: M8C, M8T, S3C, S5C (Standard model: TS2000G/M8C/VS).SNMP, Power Supply S or 3 . Supplied with: JAH-8, JMP & JITK. |
| TS2000G/XYZ/F* | TereScope2000/G-F, built-in Fusion, 620m@30db/km and 2300@3db/km, Giga-Ethernet and Fiber Channel Link. Interface options (SFP based): M8L, S3L, S5L (Standard model: TS2000G/M8L/FS).SNMP, Power Supply S or 3. Supplied with: JAH-8, JMP & JITK. |
| TereScopes - Up to 155 Mbps | |
| TS2000/XYZ/V* | TereScope2000/155, 660m@30db/km and 2250m@3db/km. E3, T3, Fast-Ethernet or 155Mbit/s (OC3, ATM, STM-1) Link, Interface options: M3C, M3T, S3C, S5C (Standard Model: TS2000/M3C/VS).SNMP: optional. Power supply S or 3. Supplied with: JAH-8, JMP & JITK. |
| TS2000/XYZ/VM* | TereScope2000/155 with SNMP, 660m@30db/km and 2250m@3db/km. E3, T3, Fast-Ethernet or 155Mbit/s (OC3, ATM, STM-1) Link, Interface options: M3C, M3T, S3C, S5C (Standard Model: TS2000/M3C/VMS). Power supply S or 3. Supplied with: JAH-8, JMP & JITK. |
| TereScopes - Fast Ethernet, 100Mbps | |
| TS2000/FET/V* | TereScope2000/100, 750m@30db/km and 2580m@3db/km. Fast-Ethernet Link, 100BaseT interface. SNMP: optional. Power supply S or 3. The PoE is included in the 3 (low voltage) version. (Standard Model: TS2000/FET/V3). Supplied with: JAH-8, JMP & JITK. |
| TS2000/FET/VM* | TereScope2000/100, with SNMP, 750m@30db/km and 2580m@3db/km. Fast-Ethernet Link, 100BaseT interface. Power supply S or 3. The PoE is included in the 3 (low voltage) version. (Standard Model: TS2000/FET/VM3). Supplied with: JAH-8, JMP & JITK. |
| TereScopes - E1 or T1 | |
| TereScope E1 Links | |
| TS2000/E1/V* | TereScope2000/E1, 1000m@30db/km and 4100m@3db/km. E1 Link, G.703/G.704, Interface: Universal connector to be used with 75 Ohm (Coax) or 120 Ohm (STP). SNMP: optional. Power supply S or 3. Supplied with: JAH-8, JMP & JITK. |
| TereScope T1 Links | |
| TS2000/T1/V* | TereScope2000/T1, 1000m@30db/km and 4100m@3db/km. T1 Link, G.703/G.704, Interface: Universal connector to be used with 100Ohm (STP). SNMP: optional. Power supply S or 3. Supplied with: JAH-8, JMP & JITK. |
| TereScopes - MUX, 4E1 or 4T1 | |
| TereScope 4E1 Links | |
| TS2000/4E1/V* | TereScope2000/4E1, 870m@30db/km and 3400m@3db/km. 4E1 Link, G.703/G.704, Interface: Universal connector to be used with 75 Ohm (Coax) or 120 Ohm (STP). SNMP: optional. Power supply S or 3. Supplied with: JAH-8, JMP & JITK. |
| TereScope 4T1 Links | |
| TS2000/4T1/V* | TereScope2000/4T1, 870m@30db/km and 3400m@3db/km. 4T1 Link, G.703/G.704, Interface: Universal connector to be used with 100 Ohm STP cable. SNMP: optional. Power supply S or 3. Supplied with: JAH-8, JMP & JITK. |
| Power Supply Options | |
| TSx/x/x/V3 or F3 | To be used for 24-62 VDC operation. |
| TSx/x/x/VS or FS | To be used for 100-240vac / 50-60Hz operation. |
| Interface Options | |
| TSxxx/M8C/xx | Interface MM, 850 nm, DSC connectors only for Giga and 34 Series. |
| TSxxx/M8T/xx | Interface MM, 850 nm, DST connectors only for Giga and 34 Series. |
| TSxxx/M3C/xx | Interface MM, 1310 nm, DSC connectors only for 34 and 155 Series. |
| TSxxx/M3T/xx | Interface MM, 1310 nm, DST connectors only for 34 and 155 Series. |
| TSxxx/S3C/xx | Interface SM, 1310 nm, DSC connectors for all products. |
| TSxxx/S3L/xx | SFP SM, 1310 nm, LC connector only for TS700/G-F and TS2000/G-F model. |
| TSxxx/S5C/xx | Interface SM, 1550 nm, DSC connectors only for Giga and 155 Series. |
| TSxxx/S5L/xx | SFP SM, 1550 nm, LC connector only for TS700/G-F and TS2000/G-F model. |
| Single TereScope Unit (1 terminal) | |
| T-x/x/x/V* | To order a single TS terminal, please use same products code, but REPLACE the TS with T-. Ex: TS4000/M3C/V1S to be T-4000/M3C/V1S. This single unit is supplied without any accessories. 50% of the link price (after deducting accessories price). |
| THxxx/xx/V* | To order a single TereScope head with accessories, please use same products code, but REPLACE the TS with TH. Ex.:TS4000/155 LV code is TS4000/M3C/V13 to be TH4000/M3C/V13. This TS head is supplied with all standard accessories. 50% of the link price. |
| Accessories** | |
| JMP | Mounting Plate for TereScope 155 (PS), 34,10 , 8 (Mux) and 2 products. |
| JAH-8 | Aiming Head for TereScope2000 series products. (2 units are supplied free of charge with every TS2000 link) |
| JITK | Installer Tool Kit, This Kit includes the work tools required for opening and closing nuts and screws of the TereScope for optimal installation. (2 units are supplied free of charge with every TereScope link). Each TS series has his own JITK. |
| 10-00-M054C | 10" wall mount pedestal |
| 10-00-M053C | 22" wall mount pedestal |
| 10-00-M022C | 34" wall mount pedestal |
| 10-00-M015C | 47" pedestal concrete mount |
| 10-00-M059C | 47" pedestal beam mount |
| 10-00-M058C | 34" pedestal beam mount |
| 10-00-M050C | 34" pedestal concrete mount |
| 10-00-M057C | 22" pedestal beam mount |
| 10-00-M055C | 22" pedestal concrete mount |
| 10-00-M062C | 22" extended wall beam mount |
| 10-00-M051C | 22" extended wall concrete mount |
| 10-00-M063C | 34" extended wall beam mount |
| 10-00-M056C | 34" extended wall concrete mount |
| 10-00-M064C | 12" extended wall beam mount |
| PCL3 | Pole Clamp 3". Inner diameter 88.9mm for pole outside diameter of 88.9mm*** |
| PCL4 | Pole Clamp 4". Inner diameter 114.3mm for pole outside diameter of 114.3mm*** |
| PCL5 | Pole Clamp 5". Inner diameter 141.3mm for pole outside diameter of 141.3mm*** |
| PCL6 | Pole Clamp 6". Inner diameter 168.3mm for pole outside diameter of 168.3mm*** |
| MLR | Mount Lightning Rod |
| 50-00-M001 | Angle bracket for metal/concrete |
| 50-00-M071 | Adapter Plate for TS155 (PS), TS34, TS10 and TS2 |
| 35-00-MYK24 | Mount kit, for standalone Fusion system (pole clamp only) |
| 50-00-M999 | Custom Mount Option 1 - minor |
| 50-00-M998 | Custom Mount Option 2 - major |
