TereScope® 4000 - 1 to 155Mbps Solutions
Robustness is the key
The carrier class TereScope® 4000 operates at data rates of 1 Mbps to 155 Mbps, TereScope 4000 systems are used for medium to long distances and support a wide variety of protocols at full duplex at wire-speed. It can achieve distances of up to 5.2 km. The TS4000 exists in all models but Gigabit: TS4000/E1 (or T1), TS4000/4E1 (or 4T1), TS4000/ETH, TS4000/34, TS4000/100-F, TS4000/155 and TS4000/155-F. For proprietary protocols, or when clock recovery is not desired, the TS4000 has the option of operation in Open Protocol mode.
TereScope® 4000 uses multiple transmit aperture technology (3 transmitters) to ensure high performance in adverse weather conditions. The receiver of the long-range TereScope® 4000 has a diameter of 8” to overcome scintillation and other atmospheric noises in hot or cold weather. The TS4000 has an option for dual redundant power supplies, which noticeably improves the MTBF. When one of the power supplies breaks down, the other one continues to operate normally and transparently: the customer will only see on the back panel or on the MegaVision screen that one of the power supplies stopped working. The power supply modularity allows for replacing the faulty power supply without interrupting the normal operation of the link.
The TS4000/100-F is a model designed specifically for 100BaseTX applications, and features a copper RJ45 interface, for both the main interface and redundant FUSION output. For this model the Fusion feature is standard. This model in the low voltage version (V3) has a High Power over Ethernet (PoE, 30W) configuration.
The TS4000/155 and TS4000/155-F models also features a modular interface, i.e. the transceiver can be easily modified in the field from multimode to singlemode or from 850 mm to 1300 mm. An additional advantage of the transceiver modularity is the possibility to add the Fusion option in the field in case this option has not been previously purchased.
Features
- Accommodates 1 to 155 Mbps networks, for protocols such as E1/T1, Ethernet, 4xE1/T1, 34Mbps, Fast Ethernet, ATM
- Supports protocols: E1/T1, E3/T3, 4 x E1/T1, Ethernet, Fast Ethernet, FDDI, OC-3, ATM and STM-1
- Distances up to 5200 m
- Built-in SNMP management (in TS4000/100-F, TS4000/155 and TS4000/155-F models)
- Connection to dry contact management box (RSM-DC) – optional
- Connection to RSM box
- FUSION option – Fail-over to radio backup
- Modular network connectivity (in TS4000/155 and TS4000/155-F)
- Modular Power Supply
- Redundant Power Supply - Optional (in TS4000/100-F, TS4000/155 and TS4000/155-F models)
- Alignment using both visual feedback and received power indicators
- Fast deployment
- License-free operation
- Remote management options
- Weatherproofing: IP66
- Secure transmission
- Eyes safety Class 1M
- Chain multiple connections
- Operating at wide temperature range
- Low voltage (35-60VDC) and High voltage (100-240VAC) models
- Low consumption
- MTBF more than 10 year
- Heating: All our systems have an internal air circulation feature, based on dissipation of the power supply heat.
Specifications
| TS4000/E1 (or T1) | |
| Product Code | TS4000/E1/V* or TS4000/T1/V* |
| Applications/Data Protocol | E1 – 2.048Mbps, T1- 1.55Mbps, G.704 & G.703 |
| Performance: (distance @ attenuation) | 5500m @ 3db/km 4200m @ 5db/km 2700m @ 10db/km 1880m @ 17db/km 1220m @ 30db/km Minimum operating distance: 200m |
| Transmitter | Light source: 3 VCSELs Beam Divergence 3 mrad |
| Receiver | Detector: Silicon Photodiode |
| Interface | BNC and RJ48 (STP) |
| Power Supply | 100 – 240 VAC @ 50/60 Hz or 35-60 VDC (V3 versions) Power consumption : 30W |
| TS4000/4E1 (or 4T1) | |
| Product Code | TS4000/4E1/V* or TS4000/4T1/V* |
| Applications/Data Protocol | 4xE1 - 4x2.048Mbps 4xT1 – 4x1.55Mbps G.703 & G704 |
| Performance: (distance @ attenuation) | 5000m @ 3db/km 3850m @ 5db/km 2500m @ 10db/km 1730m @ 17db/km 1130m @ 30db/km Minimum operating distance: 150m |
| Transmitter | Light Source : 3 VCSELs, Beam Divergence 3mrad |
| Receiver | Detector: Silicon Photodiode |
| Interface | Universal connector E1: 75 Ohm or 120 Ohm, T1: 100 Ohm |
| Power Supply | 100 – 240 VAC @ 50/60 Hz or 35-60 VDC (V3 versions) Power consumption : 30W |
| TS4000/ETH | |
| Product Code | TS4000/ETH/V* |
| Applications/Data Protocol | Ethernet – 10Mbps |
| Performance: (distance @ attenuation) | 5000m @ 3db/km 3850m @ 5db/km 2500m @ 10db/km 1730m @ 17db/km 1130m @ 30db/km Minimum operating distance: 150m |
| Transmitter | Light Source : 3 VCSELs, Beam Divergence 3 mrad |
| Receiver | Detector: Silicon Photodiode |
| Interface | 10BaseTX |
| Power Supply | 100 – 240 VAC @ 50/60 Hz or 35-60 VDC (V3 versions) Power consumption : 30W |
| TS4000/34 | |
| Product Code | TS4000/34XYZ /V* |
| Applications/Data Protocol | Open Protocol up to 34Mbps |
| Performance: (distance @ attenuation) | 4400m @ 3db/km 3350m @ 5db/km 2240m @ 10db/km 1550m @ 17db/km 1040m @ 30db/km Minimum operating distance: 200m |
| Transmitter | Light Source : 3 VCSELs, Beam Divergence 3 mrad |
| Receiver | Detector: Silicon Photodiode |
| Interface | ST 850nm other connectors available |
| Power Supply | 100 – 240 VAC @ 50/60 Hz or 35-60 VDC (V3 versions) Power consumption : 30W |
| TS4000/100-F | |
| Product Code | TS4000/FET/F** |
| Applications/Data Protocol | Fast Ethernet – 100Mbps |
| Performance: (distance @ attenuation) | 3500m @ 3db/km 2750m @ 5db/km 1850m @ 10db/km 1320m @ 17db/km 880m @ 30db/km Minimum operating distance: 120m |
| Transmitter | Light Source : 3 VCSELs, Beam Divergence 3 mrad |
| Receiver | Detector: Silicon Photodiode |
| Interface | 2x 100BaseTX (including Fusion port) |
| Power Supply | 100-240 VAC @ 50/60 Hz or 35-60 VDC (F3 versions) High PoE (Power over Ethernet): In V3 version (Low voltage) Power consumption : 30W Redundant Power Supply: Optional |
| TS4000/155 or 155-F | |
| Product Code | TS4000/XYZ/V** or TS4000/XYZ/F** |
| Applications/Data Protocol | Fast Ethernet, ATM(1-155Mbps), OC3, STM1, E3, T3, OC1/STMO & Open Protocol |
| Performance: (distance @ attenuation) | 3500m @ 3db/km 2750m @ 5db/km 1850m @ 10db/km 1320m @ 17db/km 880m @ 30db/km Minimum operating distance: 120m |
| Transmitter | Light Source : 3 VCSELs, Beam Divergence 3 mrad |
| Receiver | Detector: Silicon Photodiode |
| Interface | Fiber Optic Transceiver – Multimode (Singlemode available on request) |
| Power Supply | 100 – 240 VAC @ 50/60 Hz or 35-60 VDC (V3 and F3 versions) Power consumption : 30W Redundant Power Supply: Optional |
| All Models | |
| Operating Temperature | -50 to +60° C/-58 to 140° F |
| Storage Temperature | -50 to +70° C/-58 to 158° F |
| Humidity | 95% non-condensing |
| Housing | Weatherproofing: IP66 |
| Eye Safety Class | 1M |
| Dimensions mounted on accessories (mm) | Depth : 790 mm/31.1 in Width: 390 mm/15.4in Height : 574 mm/22.6 in |
| Weight | TereScope: 14 kg Accessories: 21.5 kg |
| @ 3 dB/km = Light rain (5-10 mm/hr) - Light haze @ 5 dB/km = Light to medium rain (15-20 mm/hr) - Haze @10 dB/km = Medium to heavy rain (45 mm/hr) - Light snow - Thin fog @17 dB/km = Cloudburst (100 mm/hr) - Medium snow - Light fog @30 dB/km = Rain (up to 180 mm/hr) - Blizzard - Moderate fog | |
Ordering Information
| Active TereScope Products | |
| TereScopes - Up to 155 Mbps | |
| TS4000/XYZ/V** | TereScope4000/155, 880m@30db/km and 3500m@3db/km. 1-155Mbit/s Link. Interface options: M3C, M3T, S3C, S5C (Standard model: TS4000/M3C/V1S). SNMP, Redundant PS: Optional. PS options: 1S, 2S, 13, 23, 24. Supplied with: AD-5000, JMP-8 & JITK. |
| TS4000/XYZ/F** | TereScope4000/155 with Fusion, 880m@30db/km and 3500m@3db/km. 1-155Mbit/s Link. Interface options: M3C, M3T, S3C, S5C (Standard model: TS4000/M3C/F1S). SNMP, Redundant PS: Optional. PS options: 1S, 2S, 13, 23, 24. Supplied with: AD-5000, JMP-8 & JITK. |
| Insertable PSU for TS5000/G, TS5000/155 and TS4000/155 series | |
| PS-X000-PR-HV | Modular insertable power supply for TS4000 and TS5000, 100-240v AC. |
| PS-X000-PR-LV | Modular insertable power supply for TS4000 and TS5000, 35-60v DC. |
| Insertable PSU for TS5000/4000, E1,4E1, 4T1, ETH & 34 series | |
| PS-4000-HV | Modular insertable power supply unit for TereScope 4000 E1, T1, 4E1, 4T1, ETH and 34 series , 100-240VAC. |
| PS-4000-LV | Modular insertable power supply unit for TereScope 4000E1, T1, 4E1, 4T1, ETH and 34 series , 35-60 VDC. |
| Insertable Interface unit for TS5000/4000 Giga and 155 series | |
| FO/G-M8C | F/O Module, 1 port MM 850nm DSC for TS5000/G. |
| FO/G-M8C-M8C | F/O Fusion Module, 2 ports MM 850nm DSC for TS5000/G. |
| FO/G-S3C | F/O Module, 1 port SM 1310nm DSC for TS5000/G. |
| FO/G-S3C-S3C | F/O Fusion Module, 2 ports SM 1310 nm DSC for TS5000/G. |
| FO/155-M3C | F/O Module, 1 port MM 1310nm DSC for TS4000/155 and TS5000/155. |
| FO/155-M3C-M3C | F/O Fusion Module, 2 ports MM 1310nm DSC for TS4000/155 and TS5000/155. |
| FO/155-S3C | F/O Module, 1 port SM 1310nm DSC for TS4000/155 and TS5000/155. |
| F/O155-S3C-S3C | F/O Fusion Module, 2 ports SM 1310nm DSC for TS4000/155 and TS5000/155. |
| TereScopes - Fast Ethernet, 100Mbps | |
| TS4000/FET/F** | TereScope4000/100-F, Fusion, 880m@30db/km and 3500m@3db/km, Fast-Ethernet link, 100BaseT interface. PoE in the "3" version. (Standard model: TS5000/FET/F13). SNMP, Red.PS: Optional. PS options: 1S, 2S, 13, 23, 24. Supplied with:AD-5000, JMP-8 & JITK. |
| TereScopes - Open Protocol (OP) up to 34Mbps | |
| TS4000/34XYZ/V* | TereScope4000/34, 1040m@30db/km and 4400m@3db/km, Open Protocol link 1-34Mbps. Interface options: M8C, M8T, M3C, S3C (Standard Model: TS4000/34M8T/VS). SNMP: optional. Power supply S or 3. Supplied with:AD-5000, JMP-8 & JITK. |
| TereScopes - Ethernet, 10Mbps | |
| TS4000/ETH/V* | TereScope4000/ETH, 1130m@30db/km and 5000m@3db/km, ETHERNET Link , 10 Mbit/s, (RJ45). SNMP: optional. Power supply S or 3. Supplied with: AD-5000, JMP-8 & JITK. |
| TereScopes - E1 or T1 | |
| TereScope E1 Links | |
| TS4000/E1/V* | TereScope4000/E1, 1220m@30db/km and 5500m@3db/km. E1 Link, G.703/G.704, Interface: Universal connector to be used with 75 Ohm (Coax) or 120 Ohm (STP). SNMP: optional. Power supply S or 3. Supplied with: AD-5000, JMP-8 & JITK. |
| TereScope T1 Links | |
| TS4000/T1/V* | TereScope4000/T1, 1220m@30db/km and 5500m@3db/km. T1 Link, G.703/G.704, Interface: Universal connector to be used with 100 Ohm (STP). SNMP: optional. Power supply S or 3. Supplied with: AD-5000, JMP-8 & JITK. |
| TereScopes - MUX, 4E1 or 4T1 | |
| TereScope 4E1 Links | |
| TS4000/4E1/V* | TereScope4000/4E1, 1130m@30db/km and 5000m@3db/km. 4E1 Link, G.703/G.704, Interface: Universal connector to be used with 75 Ohm (Coax) or 120 Ohm (STP). SNMP: optional. Power supply S or 3. Supplied with: AD-5000, JMP-8 & JITK. |
| TereScope 4T1 Links | |
| TS4000/4T1/V* | TereScope4000/4T1, 1130m@30db/km and 5000m@3db/km. 4T1 Link, G.703/G.704, Interface: Universal connector to be used with 100 Ohm (STP). SNMP: optional. Power supply S or 3. Supplied with: AD-5000, JMP-8 & JITK. |
| TereScope 16E1and 16T1 Links | |
| TS4000/16E1/V* | Bundle consists of TS4000/34XYZ/V* link and indoor 16E1 Multiplexer unit with G.703 and G.704 inputs, RJ45 connector. 1040m@30db/km and 4400m@3db/km, Connectivity provided by MM fiber 850nm (fiber cable is NOTÿprovided).ÿDistance up to 3000m. |
| Power Supply Options | |
| TSxxx/xx/V13 or F13 | To be used for 1 power supply 35-60 VDC operation. For products with an optional redundant power supply. |
| TSxxx/xx/V1S or F1S | To be used for 1 power supply 100-240vac / 50-60Hz operation. For products with an optional redundant power supply. |
| TSxxx/xx/V23 or F23 | To be used for 2 power supplies 35-60 VDC operation. For products with an optional redundant power supply. |
| TSxxx/xx/V24 or F24 | To be used for 2 power supplies: 1 PS 100-240 VAC and 1 PS 35-60 VDC operation. For products with an optional redundant power supply. |
| TSxxx/xx/V2S or F2S | To be used for 2 power supplies 100-240vac / 50-60Hz operation. For products with an optional redundant power supply. |
| TereScope Fusion | |
| TS100-F/FUS/BDL | TS Fusion Bundle for Backup a TS155 series (with F/O interface). Consists of: 2 x MRW55:Carrier Grade DUAL BAND WLAN Wireless Outdoor Bridge with 17Dbi integrated antenna. + 2 x MC102FI/M: 10/100BaseTX to 100BaseFX converter (MM, 1310nm, 0-2km, DSC). |
| TS100-C/FUS/BDL | TS Fusion Bundle for TS100 series. Consists of: 2 x MRW55:DUAL BAND WLAN Wireless Outdoor Bridge with 17Dbi integrated antenna. + 2xOS306-E: 4 RJ45 10/100/1000Base-T LAN and 2 100/1000FX WAN SFP ports, + 2xSFP-O3-M: SFP F-ETH & OC-3, MM, 1310nm,0-2km. |
| Interface Options | |
| TSxxx/M8C/xx | Interface MM, 850 nm, DSC connectors only for Giga and 34 Series. |
| TSxxx/M8T/xx | Interface MM, 850 nm, DST connectors only for Giga and 34 Series. |
| TSxxx/M3C/xx | Interface MM, 1310 nm, DSC connectors only for 34 and 155 Series. |
| TSxxx/M3T/xx | Interface MM, 1310 nm, DST connectors only for 34 and 155 Series. |
| TSxxx/S3C/xx | Interface SM, 1310 nm, DSC connectors for all products. |
| TSxxx/S5C/xx | Interface SM, 1550 nm, DSC connectors only for Giga and 155 Series. |
| Single TereScope Unit (1 terminal) | |
| T-x/x/x/V* | To order a single TS terminal, please use same products code, but REPLACE the TS with T-. Ex: TS4000/M3C/V1S to be T-4000/M3C/V1S. This single unit is supplied without any accessories. 50% of the link price (after deducting accessories price). |
| THxxx/xx/V* | To order a single TereScope head with accessories, please use same products code, but REPLACE the TS with TH. Ex.:TS4000/155 LV code is TS4000/M3C/V13 to be TH4000/M3C/V13. This TS head is supplied with all standard accessories. 50% of the link price. |
| Management** | |
| RSM-SNMP | Management Access. Optional management card, based on SNMP (IP). Requires its own connector (RJ45) on terminal rear panel. Factory set. Applicable with TereScope TS4000, TS5000, (E1, T1, 4E1, 4T1, ETH and 34 series). To be monitored by MegaVision. |
| RCMU-SNMP | Remote Control and Management Unit based on SNMP (IP). Applicable with TS4000/155, TS5000/155 and TS5000/G models. To be monitored by MegaVision. |
| RSM | Remote Status Monitor (RSM) for TS800, TS4000, TS5000 series products. |
| RSM-DC | Dry contact interface. This device converts RSM signals to dry contact. Applicable with TereScope TS800, TS4000 and TS5000 Series products. |
| Accessories** | |
| JPOE-X000 | Data and high power injector for TS4000/100 and TS5000/100. AC and Data in, PoE out. 30W. |
| JMP | Mounting Plate for TereScope 155 (PS), 34,10 , 8 (Mux) and 2 products. |
| JMP-8 | Mounting Plate for TS4000/XXX and TS5000/XXX links, dedicated to surface installation |
| AD-5000 | Alignment Device for TS4000 & TS5000 series. This special alignment head has a very fine and accurate rotation movement with 0.09mrad precision. (2 units are supplied free of charge with every link) |
| JITK | Installer Tool Kit, This Kit includes the work tools required for opening and closing nuts and screws of the TereScope for optimal installation. (2 units are supplied free of charge with every TereScope link). Each TS series has his own JITK. |
| 10-00-M054C | 10" wall mount pedestal |
| 10-00-M053C | 22" wall mount pedestal |
| 10-00-M022C | 34" wall mount pedestal |
| 10-00-M015C | 47" pedestal concrete mount |
| 10-00-M059C | 47" pedestal beam mount |
| 10-00-M058C | 34" pedestal beam mount |
| 10-00-M050C | 34" pedestal concrete mount |
| 10-00-M057C | 22" pedestal beam mount |
| 10-00-M055C | 22" pedestal concrete mount |
| 10-00-M062C | 22" extended wall beam mount |
| 10-00-M051C | 22" extended wall concrete mount |
| 10-00-M063C | 34" extended wall beam mount |
| 10-00-M056C | 34" extended wall concrete mount |
| 10-00-M064C | 12" extended wall beam mount |
| PCL3 | Pole Clamp 3". Inner diameter 88.9mm for pole outside diameter of 88.9mm*** |
| PCL4 | Pole Clamp 4". Inner diameter 114.3mm for pole outside diameter of 114.3mm*** |
| PCL5 | Pole Clamp 5". Inner diameter 141.3mm for pole outside diameter of 141.3mm*** |
| PCL6 | Pole Clamp 6". Inner diameter 168.3mm for pole outside diameter of 168.3mm*** |
| MLR | Mount Lightning Rod |
| 50-00-M001 | Angle bracket for metal/concrete |
| 50-00-M071 | Adapter Plate for TS155 (PS), TS34, TS10 and TS2 |
| 35-00-MYK24 | Mount kit, for standalone Fusion system (pole clamp only) |
| 50-00-M999 | Custom Mount Option 1 - minor |
| 50-00-M998 | Custom Mount Option 2 - major |
